
SS 304 Seamless Pipes

SS 304 Welded Pipes

SS 304 Square Pipes

SS 304 Rectangle Pipes

SS 304 Round Pipes





Rico Steel supplies stainless steel fittings to Nigerian piping contractors, EPC firms and process plant operators. Fittings join pipe runs, redirect flow and change line diameter, keeping fluid transport systems sealed and serviceable. As a Stainless Steel Fittings Supplier, Stockist in Nigeria, Rico Steel matches each item to grade, dimension, pressure rating, service temperature and corrosion exposure. Specification accuracy decides service life. Confirm project requirements before ordering, because a wrong grade selection fails quickly in chloride service.
+91 9820010544
Rico Steel lists Stainless Steel Buttweld Fittings in Nigeria against the material and dimensional parameters below. Match them to the connecting stainless steel pipes before ordering, because fitting bore and schedule must track the line.
| Parameter | Detail |
| Product types | Elbows, tees, reducers, end caps, base plates, cover plates, T-points, anchor fasteners |
| Grades | SS 304, SS 316 |
| Size range | 1/2 inch to 24 inch NB (indicative) |
| Wall thickness | SCH 10S, SCH 40S, SCH 80S, SCH 160S, XXS |
| Connection type | Buttweld, socket weld, threaded |
| Elbow angles | 45 degree, 90 degree, 180 degree |
| Bend radius | Long radius 1.5D, short radius 1.0D |
| Standards | ASTM A403, ASME B16.9 |
| Surface finish | Pickled and passivated, mill finish |
| Documentation | Mill test certificate to EN 10204 3.1, subject to availability |
“CONTACT US TODAY IF YOU ARE LOOKING TO BUY HIGH-QUALITY STAINLESS STEEL FITTINGS IN NIGERIA.”
Fitting type follows the geometry a pipeline needs. Rico Steel specification range covers buttweld items in SS 304 and SS 316, listed below by function.
Elbows turn a line 45, 90 or 180 degrees. Long radius patterns cut pressure drop.
Tees split or merge flow at 90 degrees. Reducing tees branch into a smaller bore.
Reducers step bore size down. Concentric suits vertical runs, eccentric prevents vapour lock horizontally.
Caps seal an open pipe end, closing line terminations and future tie-in points.
Base plates spread load from a support or column into the foundation beneath.
Cover plates close openings in enclosures, ducts and equipment housings.
T-points give a fixed branch where instrumentation or a tap-off joins the run.
Anchor fasteners fix supports, brackets and base plates to concrete or structural steel.
WE PROVIDE HIGH-QUALITY STAINLESS STEEL FITTINGS IN NIGERIA
Grade choice in Nigeria follows the process fluid and the surrounding air, not the cheapest line item available.
Fluid chemistry, ambient conditions, temperature, pressure and the governing engineering specification together decide the grade.
Stainless steel pipe fittings sit under HSN heading 7307, split by connection type.
| HSN Code | Description |
| 7307 | Tube or pipe fittings of iron or steel |
| 730721 | Flanges, stainless steel |
| 730722 | Threaded elbows, bends and sleeves, stainless steel |
| 730723 | Butt welding fittings, stainless steel |
| 730729 | Other stainless steel tube or pipe fittings |
Confirm the applicable Nigerian tariff line with your clearing agent before shipment.
Pricing for Stainless Steel Fittings in Nigeria rests on three criteria: grade, size with wall thickness, and order quantity.
| Criteria | Indicative Figure |
| Approximate price range (INR per kg) | SS 304: INR 280 to 480 per kg. SS 316: INR 480 to 780 per kg |
| Cost per unit (approx.) | 2 inch SCH 40 long radius 90 degree elbow: INR 350 to 900 per piece, grade dependent |
| Factors affecting price | Nickel and molybdenum raw material movement, fitting size with schedule, order volume with documentation scope |
Figures exclude freight, duty and inspection charges. Request a current quote against your bill of material.
Nigerian process industries use stainless fittings wherever a line carries fluid that would attack carbon steel. The sectors below account for most of the demand.
Lagos, Port Harcourt and Warri concentrate most of this activity. Salt-laden air off the Gulf of Guinea pushes coastal buyers toward SS 316, even on utility lines where SS 304 would otherwise serve.
Settle these seven technical points before releasing a purchase order, because a fitting that misses one of them will not clear site inspection. Each carries documentation consequences.
Six considerations matter when Nigerian buyers shortlist a fittings source.
Rico Steel works as a Stainless Steel Fittings Exporter to Nigeria through a five-step enquiry route.
Availability, shipping arrangements and delivery timelines need confirmation on every order, since stock position and vessel schedules shift. Send your bill of material to open an enquiry.
Elbows, tees, reducers, end caps, base plates, cover plates, T-points and anchor fasteners. Buttweld patterns dominate the range, supplied in SS 304 and SS 316 subject to availability at enquiry.
SS 304 and SS 316 cover most industrial duty. SS 304 serves general process and utility lines, while SS 316 handles chloride-bearing media that would pit the lower grade.
Oil and gas, petrochemical, water treatment, power generation, food processing, pharmaceutical and general engineering plants. Lagos, Port Harcourt and Warri account for a large share of that demand.
Molybdenum. SS 316 carries roughly 2 to 3 percent of it, which resists pitting and crevice attack in chloride service. SS 304 contains none and corrodes faster in salt-laden conditions.
ASTM A403 specifies wrought austenitic stainless steel piping fittings. ASME B16.9 sets dimensions and tolerances for factory-made wrought buttweld fittings. Most project specifications call out both together.
Yes, against drawings and a defined standard. Share nominal bore, schedule, bevel detail and quantity, then confirm feasibility and lead time with Rico Steel before committing to the order.
Rico Steel handles export enquiries for Nigerian destinations, with packing, documentation and shipment arranged per order. Availability and delivery timelines need confirmation before each shipment leaves.