Stainless Steel Fittings Supplier, Stockist in Tanzania

Home » Stainless Steel Fittings Supplier, Stockist in Tanzania

SS 304 Seamless Pipes

SS 304 Welded Pipes

SS 304 Square Pipes

SS 304 Rectangle Pipes

SS 304 Round Pipes

Stainless Steel Fittings Supplier, Stockist in Tanzania

Home » Stainless Steel Fittings Supplier, Stockist in Tanzania
fitting-icon-1
fitting-icon-2
fitting-icon-3
fitting-icon-4.
fitting-icon-5
stainless-steel-fittings-tanzania

Rico Steel is a Mumbai, India-based stainless steel pipe fittings supplier serving projects in Tanzania, exporting SS 304 and SS 316 fittings for industrial piping applications. Stainless steel fittings turn individual pipe lengths into cohesive, functional systems by joining lines, redirecting flow, branching headers, and stepping pipe sizes. For abrasive or corrosive service, fitting selection should account for material grade, pressure, temperature, dimensions, and process conditions. Supporting Tanzania’s expanding mining, mineral processing, water treatment, and food production industries, Rico Steel exports ASTM A403 compliant SS 304 and SS 316 buttweld fittings built for reliable site performance.

Stainless Steel Fittings Specifications

The specifications below cover the standards, grades and dimensions Rico Steel works to on fittings supplied into Tanzania.

Parameter Detail
Specification ASTM A403 / ASME SA403
Dimensional standard ASME B16.9 (buttweld), ASME B16.5 (flanges)
Grades SS 304, SS 316
Fitting types 90° and 45° elbows, equal and reducing tees, concentric and eccentric reducers
Size range NPS 1/2 to NPS 48 per ASME B16.9, subject to availability
Schedules SCH 10S, SCH 40S, SCH 80S, SCH 160, XXS
End finish Bevelled for butt welding
Certification ISO 9001:2015

“CONTACT US TODAY IF YOU ARE LOOKING TO BUY HIGH-QUALITY STAINLESS STEEL FITTINGS IN TANZANIA.”

Types of Stainless Steel Fittings

Stainless Steel Fittings in Tanzania cover both process piping and railing assemblies.

  • Stainless Steel Elbow Fittings: turn the line through a 45 or 90 degree change of direction.
  • Stainless Steel Tee Fittings: branch a main line into a secondary run, equal or reducing.
  • Stainless Steel Reducer Fittings: connect two pipe diameters, concentric or eccentric to suit.
  • Stainless Steel End Caps: close a line termination or a reserved tie-in point.
  • Stainless Steel Base Plates: secure a post or upright to a floor or structural surface.
  • Stainless Steel Cover Plates: finish a base plate by covering its fixing points.
  • Stainless Steel T-Points: connect a handrail to the upright supporting it.
  • Stainless Steel Anchor Fasteners: fix support hardware into concrete or masonry.

WE PROVIDE HIGH-QUALITY STAINLESS STEEL FITTINGS IN TANZANIA

SS Grades for Industrial Applications in Tanzania

The grade governs how a fitting survives its service, and Tanzania’s mix of mineral-processing and coastal industry calls on both common grades.

  • SS 304 Fittings: suit many general industrial, food processing and manufacturing applications where SS 304 gives adequate corrosion resistance. An SS 304 Fittings Supplier in Tanzania sees this grade on inland processing, utility and general plant piping.
  • SS 316 Fittings: carry molybdenum, which improves resistance to pitting and crevice corrosion in chloride-bearing conditions. This makes an SS 316 Fittings Supplier in Tanzania the route for coastal, marine, chemical and selected water-related applications.

Stainless Steel Fittings HSN Code

Stainless steel fittings carry HSN heading 7307, divided by how each fitting is manufactured.

HSN Code Description
73072100 Stainless steel flanges
73072200 Stainless steel threaded elbows, bends and sleeves
73072300 Stainless steel butt welding fittings
73072900 Other stainless steel fittings

Stainless Steel Fittings Price in Tanzania

Fitting prices move with nickel, so Rico Steel quotes each enquiry against prevailing material cost rather than from a fixed price list.

Fitting Type Grade Size Range Price
90° and 45° Elbow SS 304 / SS 316 NPS 1/2 to 24 Quoted on enquiry
Equal and Reducing Tee SS 304 / SS 316 NPS 1/2 to 24 Quoted on enquiry
Concentric and Eccentric Reducer SS 304 / SS 316 NPS 1/2 to 24 Quoted on enquiry

Applications of Stainless Steel Fittings in Tanzania

Stainless fittings support piping across the industries that drive Tanzania’s economy.

  • Mining and Mineral Processing: connections in processing, water handling and plant piping systems.
  • Oil and Gas: piping connections in applicable processing, storage and related industrial facilities.
  • Water Treatment: components in water treatment, distribution and processing systems.
  • Food and Beverage Processing: piping connections where hygiene, cleanability and corrosion resistance all count.
  • Power Generation: fittings in piping systems sized to the plant’s operating conditions.
  • Marine and Coastal Operations: grades suited to equipment and piping exposed to marine environments.
  • Chemical Processing: connections in systems handling compatible chemicals.
  • General Manufacturing: piping and equipment connections in industrial production facilities.

Quality, Specifications, and Standards

Tanzanian buyers should weigh the product and documentation detail before purchasing fittings, because a fitting that falls short of its specification is costly to replace once it is in the line.

  • Material grade and fitting type
  • Dimensions, wall thickness and tolerances
  • Connection type and end preparation
  • Pressure and temperature requirements
  • Applicable ASTM and ASME standards
  • Material Test Certificates and traceability, where available
  • Inspection reports and project-specific documentation, where applicable

ASTM A403 applies to wrought austenitic stainless steel piping fittings, and ASME B16.9 covers factory-made wrought buttweld fittings.

Why Choose Rico Steel as a Stainless Steel Fittings Supplier for Tanzania?

We at Rico Steel supports Tanzanian buyers from its Mumbai, India, operation, coordinating fitting grade, dimensions, documentation, availability, and export requirements before shipment.

  • Stainless steel fitting options for industrial piping systems
  • SS 304 and SS 316 options, subject to availability
  • Assistance with product selection based on specifications
  • Support for inquiries involving grades, dimensions and quantities
  • Quality documentation, where available
  • Order coordination and shipment arrangements, where offered

Supply and Export Support to Tanzania

Explore the five features of stainless fittings to consider on a Tanzania project.

  • Specify the type of fitment, the grade, size, and standards.
  • Rico Steel needs to know the number and the project requirements.
  • Confirm availability of items, quality documents, and inspection needs.
  • Also, agree on the packaging, the paperwork for exporting, and shipment, if any.
  • Check on shipping time and your order information.

FAQs

Elbows, tees and reducers come as buttweld fittings in SS 304 and SS 316 to ASTM A403. Railing and support work is covered by end caps, base plates, cover plates, T-points and anchor fasteners. Available sizes run from NPS 1/2 to NPS 48, subject to stock.

SS 304 handles general industrial, food and manufacturing lines, and SS 316 takes on chloride, coastal and chemical exposure thanks to its molybdenum. Which one applies comes down to the operating conditions.

Mining and mineral processing, oil and gas, water treatment, food and beverage, power generation, chemical processing and coastal operations all use stainless fittings where corrosion resistance is required.

SS 316 suits many coastal and marine applications because its molybdenum content resists chloride-induced pitting. For full seawater immersion, the engineering specification should confirm whether 316 or a higher alloy is needed.

ASTM A403 governs wrought austenitic Stainless Steel Buttweld Fittings in Tanzania and elsewhere, and ASME B16.9 sets the dimensions for factory-made wrought buttweld fittings. The project specification names the applicable editions.

Custom sizes outside the ASME B16.9 standard range are considered on a project basis. Share the dimensions, grade and quantity, and the availability and lead time follow from there.

Yes. Rico Steel ships SS 304 and SS 316 fittings to Tanzanian projects, handling export documentation and shipment order by order, with delivery confirmed at the enquiry stage.

BROWSE OUR PRODUCTS