Linkedin-in Instagram

304 Stainless Steel ERW Pipe in Tanzania

Home » 304 Stainless Steel ERW Pipe in Tanzania

SS 304 Seamless Pipes

SS 304 Welded Pipes

SS 304 Square Pipes

SS 304 Rectangle Pipes

SS 304 Round Pipes

304 Stainless Steel ERW Pipe in Tanzania

Home » 304 Stainless Steel ERW Pipe in Tanzania

SS Seamless Pipes

SS Welded Pipes

SS Square Pipes

SS Rectangle Pipes

SS Round Pipes

stainless-steel-304-erw-pipe-in-tanzania

What Makes 304 Stainless Steel ERW Pipe Different?

SS 304 ERW pipe starts as cold-rolled strip holding 18 to 20% chromium and 8 to 11% nickel, designated UNS S30400, EN 1.4301 and JIS SUS 304. Electric resistance welding forms the seam: rollers curl the strip into a round, then high-frequency current fuses the edges under pressure. Welded construction gives one longitudinal seam, an even wall and a lower cost per metre than seamless.

Get a Free Quote Now

CALL FOR HELP

+91 9820010544

304 Stainless Steel ERW Pipe Dimensions and Standard Details

Rico Steel supplies 304 stainless steel ERW pipe in these sizes.

Parameter Details
Outside diameter 12.7 to 609.6 mm
Wall thickness and schedule 0.8 to 6.35 mm; Schedule 5S and 10S
Standard and custom lengths 6 m standard; custom cuts
Pipe ends Plain, beveled, threaded
Surface finish Mill, polished, satin, BA
Applicable ASTM and ASME standards ASTM A312, A554, A778; ASME SA312, B36.19M

SS 304 ERW Pipe Options in Tanzania

SS 304 ERW Round Pipe in Tanzania

Round pipe covers handrails, process lines and water services, with outside diameters from 12.7 mm to 609.6 mm and clean seams.

SS 304 ERW Polished Pipe in Tanzania

Polished pipe gives a mirror or brushed surface for staircase balustrades, shopfronts, lift lobbies and hotel entrances where appearance matters.

SS 304 ERW Decorative Pipe in Tanzania

Decorative pipe combines a refined finish with ASTM A554 tolerances, so architects specify it for railings, furniture frames and signage posts.

SS 304 ERW Large Diameter Pipe in Tanzania

Large diameter pipe, running from 219.1 mm to 609.6 mm, carries bulk water, process fluids and exhaust ducting in plants.

SS 304 ERW Square and Rectangular Pipe in Tanzania

Square and rectangular sections, made to ASTM A554, give flat faces for welded frames, gates, canopies and machine guards without cutting.

WE OFFER HIGH-QUALITY 304 STAINLESS STEEL ERW PIPES IN TANZANIA. WE ARE A MANUFACTURER & SUPPLIER OF SS 304 ERW PIPES, AVAILABLE IN VARIOUS SIZES, WALL THICKNESSES, AND SURFACE FINISHES TO MEET DIFFERENT INDUSTRIAL, ARCHITECTURAL, AND DECORATIVE REQUIREMENTS.

SS 304 Grade Equivalents and International Designations

The international designations equivalent to SS 304 is listed below in the table.

Designation System
UNS S30400 American
EN 1.4301 / X5CrNi18-10 European, EN 10088
JIS SUS 304 Japanese, JIS G 3459
Applicable product standards ASTM A312, A554; ASME SA312

304 ERW Pipe Performance and Fabrication Features

  • Rolled strip produces pipe whose outside diameter holds tight tolerances, so fittings and flanges match on site.
  • Cold-rolled strip holds one thickness across its width, so every metre of pipe delivers an even wall.
  • Grade 304 welds cleanly by TIG, MIG and plasma methods, and its austenitic structure needs no preheat.
  • Fabricators cut, bend, roll and form 304 ERW pipe on standard workshop tools, with 35% minimum elongation.
  • Buyers choose mill, polished, satin or BA surfaces from one supplier, so a single order covers every need.

304 Stainless Steel ERW Pipe Applications in Tanzania

  • Architects specify 304 ERW pipe for handrails, balustrades and canopies across Dar es Salaam, Arusha and Dodoma.
  • Contractors run 304 pipe in potable water lines, pump stations and treatment plants, where it protects quality.
  • Processors install polished 304 pipe in dairy, juice and edible oil lines because its smooth bore cleans easily.
  • Hospitals, hotels, schools and malls use 304 ERW pipe for railings, kitchen exhaust and plumbing under daily use.
  • Workshops weld 304 ERW pipe into conveyors, machine frames, tank supports and exhaust assemblies that hold shape.
  • Plants use 304 pipe for mild chemical and detergent lines, while harsher chloride duties call for grade 316.

Surface Finishes and End Types for SS 304 ERW Pipe

  • Mill finish leaves the annealed, as-welded surface untouched, which suits concealed runs and pipework painted later.
  • Polished finish brings the surface to 180 to 400 grit, giving railings and exposed pipework a reflective look.
  • Satin finish applies a directional brushed grain that hides fingerprints and light scratches on handrails and door pulls.
  • BA finish, short for bright annealed, gives a mirror-like surface from controlled-atmosphere annealing and suits hygienic work.
  • Plain ends leave the pipe cut square, ready for butt welding, clamps or push-fit connectors without preparation.
  • Beveled ends carry a 37.5 degree machined angle that gives full weld penetration on walls from 3 mm.
  • Threaded ends, cut to NPT or BSP where wall thickness allows, suit small bore utility lines needing joints.

Testing and Inspection Requirements for 304 ERW Pipe

Rico Steel confirms the 304 grade by spectrometer on every lot. Inspectors examine weld seams and surfaces for pinholes and scratches. Check diameter, wall thickness and length against the order. Hydrostatic testing runs where required, and non-destructive testing covers the weld where specified. A Material Test Certificate records heat number, chemistry and mechanical results.

How to Select 304 ERW Pipe for a Tanzanian Project?

  1. Grade and standard: 304 to ASTM A312 or A554.
  2. Outside diameter and wall thickness
  3. Schedule: 5S and 10S.
  4. Required length: 6 m or cut to size.
  5. Surface finish: mill, polished, satin, BA.
  6. End configuration: plain, beveled, threaded.
  7. Application and operating conditions: temperature, chlorides.
  8. Testing and documentation: hydrostatic, NDT, MTC.

304 Stainless Steel ERW Pipe for Tanzanian Applications

304 stainless steel ERW pipe pairs 18Cr-8Ni corrosion resistance with an even welded wall. It has a lower cost than seamless, suiting railings in Zanzibar and workshops in Dar es Salaam. Match grade, wall and finish to site conditions. Contact Rico Steel with your size, finish and quantity for a quote.

FAQs About 304 Stainless Steel ERW Pipe in Tanzania

ERW pipe comes from rolled strip with one welded seam, while seamless pipe comes from pierced billet. ERW costs less; seamless suits extreme pressure duties.

Rico Steel supplies 12.7 mm to 609.6 mm outside diameters, with 0.8 mm to 6.35 mm walls.

Handrails, water lines, food plant piping, hotel kitchens and workshop frames make up the main uses in Tanzania, because 304 resists rust and welds easily.

Yes, for potable water and utility lines. Grade 304 resists rust and scale, and wall thickness sets the pressure rating. Check chloride above 200 mg/L first.

Sheltered coastal sites suit 304 when rinsed regularly, but direct salt spray and splash zones pit it. Specify grade 316 for beachfront and marine exposure.

BROWSE OUR PRODUCTS

Rico Steel is a prominent manufacturer of Stainless Steel Welded Pipes and Tubes. The management always set benchmarks and push development forward in metallurgy. Stainless Steel Welded Pipes & Tubes stockist of all sizes and grades.

PRODUCT CATEGORIES

SPECIALIZED PRODUCTS

GET IN TOUCH

Copyright © 2024 Rico Steel | All Rights Reserved. Design & SEO by RATH INFOTECH