Stainless Steel Fittings Supplier, Stockist in Kenya

Home » Stainless Steel Fittings Supplier, Stockist in Kenya

SS 304 Seamless Pipes

SS 304 Welded Pipes

SS 304 Square Pipes

SS 304 Rectangle Pipes

SS 304 Round Pipes

Stainless Steel Fittings Supplier, Stockist in Kenya

Home » Stainless Steel Fittings Supplier, Stockist in Kenya
fitting-icon-1
fitting-icon-2
fitting-icon-3
fitting-icon-4.
fitting-icon-5
stainless-steel-fittings-supplier-exporter-in-saudi-arabia

Rico Steel operates as a premier Stainless Steel Pipe Fittings Supplier for the Kenya market, delivering certified components from our ISO 9001:2015 base in Mumbai, India. Stainless steel fittings connect pipe runs, change flow direction, create branch connections, and transition between different pipe sizes. To prevent leak points, fittings must be selected on precise material grades, pressure ratings, and thermal parameters tailored to specific operational fluids. Serving Kenya’s expanding water infrastructure, food and beverage processing, power generation, and industrial manufacturing sectors, Rico Steel exports ASTM A403 compliant SS 304 and SS 316 buttweld fittings built for demanding site conditions.

Stainless Steel Fittings Specifications

The table below records the standards, grades and dimensions Rico Steel applies to fittings supplied into Kenya.

Parameter Detail
Specification ASTM A403 / ASME SA403
Dimensional standard ASME B16.9 (buttweld)
Grades SS 304, SS 316
Fitting types 90° and 45° elbows, equal and reducing tees, concentric and eccentric reducers
Size range NPS 1/2 to NPS 48 per ASME B16.9, subject to availability
Schedules SCH 10S, SCH 40S, SCH 80S, SCH 160, XXS
End finish Bevelled for butt welding
Certification ISO 9001:2015

“CONTACT US TODAY IF YOU ARE LOOKING TO BUY HIGH-QUALITY STAINLESS STEEL FITTINGS IN KENYA.”

Types of SS Fittings Available

Stainless Steel Fittings in Kenya run across both process piping and railing hardware.

  • Stainless Steel Elbow Fittings: carry the run around a 45 or 90 degree change in direction.
  • Stainless Steel Tee Fittings: branch a header into a secondary line, equal or reducing.
  • Stainless Steel Reducer Fittings: join two different bores, concentric or eccentric to the layout.
  • Stainless Steel End Caps: seal a run at its end or at a future connection point.
  • Stainless Steel Base Plates: anchor a post or upright to a floor or structural member.
  • Stainless Steel Cover Plates: tidy a base plate by concealing the fixing points.
  • Stainless Steel T-Points: tie a handrail into its support post.
  • Stainless Steel Anchor Fasteners: bolt mounting hardware into concrete or masonry.

WE PROVIDE HIGH-QUALITY STAINLESS STEEL FITTINGS IN KENYA

Stainless Steel Grades for Industrial Applications in Kenya

Grade selection decides how a fitting holds up in service, and Kenya’s spread of inland and coastal industry draws on both common grades.

  • SS 304 Fittings: suit many general industrial, food processing and manufacturing applications where corrosion resistance meets the operating requirement. An SS 304 Fittings Supplier in Kenya sees this grade used widely across inland processing and utility lines.
  • SS 316 Fittings: carry molybdenum, which improves resistance to pitting and crevice corrosion in chloride-bearing conditions. This makes an SS 316 Fittings Supplier in Kenya the choice for coastal, marine, and selected chemical-processing work.

Stainless Steel Fittings HSN Code

Stainless steel fittings fall under HSN heading 7307, with the subheading set by the fitting’s construction.

HSN Code Description
73072100 Stainless steel flanges
73072200 Stainless steel threaded elbows, bends and sleeves
73072300 Stainless steel butt welding fittings
73072900 Other stainless steel fittings

Stainless Steel Fittings Price in Kenya

Stainless steel fitting prices vary with grade, raw material costs, size, schedule, fitting type, quantity, and market conditions.

Fitting Type Grade Size Range Price
90° and 45° Elbow SS 304 / SS 316 NPS 1/2 to 24 Quoted on inquiry
Equal and Reducing Tee SS 304 / SS 316 NPS 1/2 to 24 Quoted on inquiry
Concentric and Eccentric Reducer SS 304 / SS 316 NPS 1/2 to 24 Quoted on inquiry

Applications of Stainless Steel Fittings in Kenya

Stainless steel fittings are used across Kenya’s water, manufacturing, food-processing, power, chemical, and coastal industrial sectors.

  • Water Treatment and Infrastructure: connections in water processing, treatment, and distribution systems.
  • Food and Beverage Processing: piping connections where hygiene and corrosion resistance both matter.
  • Manufacturing and Engineering: components in industrial piping, machinery, and production plant.
  • Power Generation: fittings in piping systems sized to the plant’s operating conditions.
  • Oil and Gas-Related Facilities: piping connections in applicable processing, storage, and industrial installations.
  • Chemical Processing: connections in systems handling compatible chemicals.
  • Construction and Building Services: piping for commercial and industrial projects.
  • Marine and Coastal Operations: grades suited to equipment exposed to coastal conditions along the Mombasa seaboard.

Quality, Specifications, and Standards

Kenyan buyers should confirm the technical detail before sourcing fittings, since a fitting that misses its specification is hard to correct once installed.

  • Material grade and fitting type
  • Dimensions, wall thickness, and tolerances
  • Connection type and end preparation
  • Pressure and temperature requirements
  • Applicable ASTM and ASME standards
  • Material Test Certificates and traceability, where available
  • Inspection reports and project-specific documentation, where applicable

ASTM A403 applies to wrought austenitic stainless steel piping fittings, while ASME B16.9 applies to factory-made wrought buttweld fittings.

Why Choose Rico Steel as a Stainless Steel Fittings Supplier for Kenya?

Rico Steel supports Kenyan buyers from its Mumbai, India operation, coordinating fitting grade, dimensions, documentation, availability, and export requirements before shipment.

  • Stainless steel fitting options for industrial piping systems
  • SS 304 and SS 316 options, subject to availability
  • Assistance with selecting products based on project specifications
  • Support for inquiries involving grades, dimensions, and quantities
  • Quality documentation, where available
  • Order coordination and shipment arrangements, where offered

Supply and Export Support to Kenya

A simple five-step process covers a Kenyan enquiry for stainless fittings.

  • Identify the required fitting type, grade, dimensions and applicable standard.
  • Share the required quantity and technical specifications with Rico Steel.
  • Confirm product availability and documentation requirements.
  • Discuss packaging, export documentation, and shipment arrangements, where offered.
  • Confirm estimated delivery timelines and order details before proceeding.

Availability, shipment options and delivery schedules depend on the specific order and are confirmed with Rico Steel.

FAQs

SS 304 and SS 316 buttweld elbows, tees and reducers to ASTM A403 form the core range, with end caps plus base plates, cover plates, T-points, and anchor fasteners for railing work. The size span runs NPS 1/2 to NPS 48, subject to availability.

SS 304 is often selected for general industrial service, food-processing, and for manufacturing service with moderate exposure to chlorides. SS 316 serves better in chloride environments (coastal and marine applications) and some chemical-processing applications. The latter is working circumstances and project specification.

Stainless fittings have a property of resisting corrosion, so they are used in industries such as operating on the coast, chemicals processing, power generating, manufacturing, and food and beverage processing.

ASME B16.9, Buttwelding Ends (Factory-Made Wrought Buttweld Fittings) and ASTM A403, Wrought Austenitic Stainless Steel Piping Fittings. See the project specification for the editions and the classes.

Any non-standard sizes other than ASME B16.9 are checked for suitability with the project requirement. Availability is confirmed with lead time, dimensions, grade, and quantity stated.

Yes, Rico Steel can supply SS 304 and SS 316 fittings for the Kenya projects, and we can perform well for the export paperwork and ship it on order, and along with that can confirm delivery at the time of inquiry.

BROWSE OUR PRODUCTS